Cases A-1, -2, -3, -4, -5 Case L H W A B Type A-1 0.432 0.450 0.185 0.192 0.018 HC-49/3 A-2 0.300 0.300 0.100 0.114 0.018 HC-49T/3 A-3 0.432 0.530 0.185 0.192 0.018 HC-49N/3 A-4 0.750 0.760 0.345 0.486 0.030 HC-51/3 A-5 0.560 0.635 0.230 0.275 0.030 HC-32/3

---

Cases B and C   Case L W A B 0.590 0.470 0.354 C 0.745 0.496 0.528        Pin Dia. 0.018 (4 pins)

---

1) The listed Filter package heights are standard. The height can vary        from 1/10" to 0.400" depending on the filter frequency.  (2) 4-40 x .22 studs may be substituted for ground pins on case D thru        case I. 0.050" to 0.020" terminal are available for special applications. Case L W H(1) A B C D E(2) D 3.20 1.20 .091 0.20 0.20 0.80 2.80 .040 E 2.98 1.00 0.91 0.22 0.22 0.56 2.54 .040 F 2.80 1.00 0.71 0.22 0.22 0.56 2.36 .040 G 2.38 1.00 0.75 0.22 0.22 0.56 1.94 .040 H 2.18 1.00 0.75 0.22 0.22 0.56 1.74 .040 I 2.18 0.75 0.75 0.20 0.20 0.38 1.80 .040 J 1.75 0.63 0.54 0.13 0.13 0.40 1.49 .030 K 1.61 1.01 0.54 0.13 0.13 0.75 1.35 .030 L 1.50 0.75 0.54 0.13 0.13 0.49 1.24 0.30 M 1.20 0.61 0.45 0.13 0.13 0.35 0.94 .030 N 1.00 0.50 0.50 0.13 0.13 0.25 0.74 .030

(3) Length shown is measurement of connector projection beyond the package length or height. Lengths are not shown for Case/Connector combinations which are not recommended.